Bot board II

Questions on other types of hardware and getting it talking to the ARM CPU
Post Reply
YahooArchive
Posts: 1463
Joined: Fri Oct 19, 2012 5:11 am

Bot board II

Post by YahooArchive » Tue Oct 30, 2012 12:00 am

--- In ARMexpress@yahoogroups.com, "nsockwell" <norman@...> wrote:
>
> Has anyone used the Arm Express Lite with the Bot Board II from
> Lynxmotion. It is normally used with the Basic Atom controller. I am
> fairly new to microcontrollers and would like to use this combo.
>
> Thanks, Norman
>

Hi Norman,

Yes, that's exactly how I use it, and it works very well.

The only trick to it is that in order to program it using the ABB's
serial connection, you'll need to put some small wires and a switch on
the ArmExpress lite.

If you look at the Arm Express Lite, about half way up on the right
hand side, there is a box with the letters LD in it. There are also
two little holes. I soldered some wires and a switch in there on mine.

switch closed = enable programing
switch open = run



Post Reply